Celestion G10 GREENBACK 16 Ohm 10 inch UK-made 30W Guitar speaker (NIB)

$ 125.00

Celestion Classic Series guitar speaker. The 10″ that thinks it’s a 12″. This speaker was developed to recapture the legendary sound of Celestion’s 1970s 10s – a 10″ speaker with a surprisingly meaty tone. Low in output but with the weighty low-end balance of a 12″, the G10 Greenback features a complex, creamy mid-range and smooth, vintage top-end. Presented with overdrive distortion, it displays a well balanced crunch.

16 in stock

Description

Made in UK

It says on the manufacturer box that it is made in UK. There is also a sticker from the manufacturer on the speaker magnet that indicates the same.

 Celestion’s specs for the Celestion G10 GREENBACK Guitar speaker boast:

Celestion Classic Series guitar speaker. The 10″ that thinks it’s a 12″. This speaker was developed to recapture the legendary sound of Celestion’s 1970s 10s – a 10″ speaker with a surprisingly meaty tone. Low in output but with the weighty low-end balance of a 12″, the G10 Greenback features a complex, creamy mid-range and smooth, vintage top-end. Presented with overdrive distortion, it displays a well balanced crunch.

..from https://celestion.com/product/g10-greenback/ – see photos of the speaker itself, tone samples, and specs here as well.

New Vintage: Celestion G10 GREENBACK -new vintage guitar speaker

This Celestion G10 GREENBACK 16 Ohm guitar speaker has an unmistakable vintage tone. However, this Celestion G10 GREENBACK 16 Ohm guitar speaker is brand new.  Since the manufacturer’s box is unopened, the photo in this listing is a stock photo of the product.

Specifications of the Celestion G10 GREENBACK guitar speaker

General Specifications

Nominal diameter 10″, 254mm
Power Rating 30W
Nominal impedance 8Ω and 16Ω
Sensitivity 95dB
Chassis type Pressed steel
Voice coil diameter 1.75″, 44.5mm
Voice coil material Round copper
Magnet type Ceramic
Frequency range 95-5500Hz
Resonance frequency, Fs 98Hz
DC resistance, Re 6.41Ω & 12.05Ω
MOUNTING INFORMATION
Diameter 10.0″, 254mm
Overall depth 4.0″, 102mm
Magnet structure diameter 4.9″, 124mm
Cut-out diameter 9.0″, 229mm
Mounting slot dimensions 0.25 x 0.43″, 6.5 x 11mm
Number of mounting slots 8
Mounting slot PCD 9.6″, 245mm
Unit weight 3.6lb, 1.6kg

 

Additional information

Weight 5 lbs
Dimensions 11.3 × 10.8 × 5 in

Leave a Reply